The Turbohand ascender uses innovative technology and cutting-edge design to make climbing ropes safer, faster and easier.
• Roller makes upward glide super smooth and reduces wear and tear
• Toothed cam is finished with an anti-wear treatment and features drain holes for self cleaning
• Ergonomic rubber handle extends into the upper part of the spine for double-handed grip
• 3 large attachment points: two on the bottom and one at the top
The Turbohand ascender uses innovative technology and cutting-edge design to make climbing ropes safer, faster and easier. It features a special roller which not only helps with climbing efficiency by making the upward glide much smoother, but also reduces dangerous wear and tear on the device where the rope tends to rub on the body of a traditional ascender.
The ergonomic rubber handle extends into the upper part of the spine to allow for a double-handed grip. The handle and the rope are aligned on the same plane for the best handling and efficiency. Features three large attachment points, two on the bottom and one at the top, for optimal organization. The robust body is constructed from 3.5 mm aluminum alloy and the toothed cam is finished with a special anti-wear treatment and features drain holes to help prevent the build-up of mud and grit. The opening system is protected on both sides to prevent accidental openings.
The roller also allows the Turbohand to be rigged as a locking pulley for light hauling with a max load of 50 kg, 110 lbs. NOTE: This configuration is not intended for hauling or securing of bodies.
A stainless steel rope guide (Turbohand Guide, sold separately) can be attached to the bottom of the handle to align the rope for long ascents.
Right – Red, Left – Grey
You cannot copy content of this page